Porsche Boxster front license plate shims - image

Files (1)

BoxsterLicensePlateThings_v7_left.stl

STL

48.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BoxsterLicensePlateThings_v7_left.stl	Choose left variant	48.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

Porsche Boxster front license plate shims

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

These are shims/wedges that go between a license plate frame and the front bumper of a Porsche 986 Boxster. The model can be rotated to change the angle of the wedge and thus the angle of the plate. After rotation, bury the unused part of the model beneath the Z=0 plane. To make a set, print two of these, one mirrored to lean the other way.