PSA/Peugeot 307 windshiled washer fluid cap - image

Files (2)

Base.stl

STL

306.4 KB

cap.stl

STL

130.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Base.stl	Printable file	306.4 KB STL	Slice file	Slice file	Slice file	Ensure proper fit on the bottle neck before printing
cap.stl	Cover / cap	130.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

PSA/Peugeot 307 windshiled washer fluid cap

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed a washer cap for the Peugeot 307 for a work collegue. I designed it to be easy to mount. The base can easily clamp the bottle neck. I would recommend to print it in ABS or PETG. Hardware required: 1 x M3 nut 1 X M3 25mm long bolt.