Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| rear-panel_panda.stl | Primary model | 632.6 KB STL | 23g $0.56 | 25g $0.60 | 55g $1.33 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Rear panel support for Fiat Panda 2007
Shared by
3DPrintedCarPartDescription
Printed at 0.2 layer thikness on Anet A8. Pay attention, I've uploaded the left side support, if you need for the other side(right), you must mirroring the object. P.S. this one work better of the original one...;-D.
Compatible Cars
Originally published on thingiverse.com by Alessandro Ferrera (alexhome) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
2002 Honda Civic bumper bolt plug cover
Land Rover Discovery Rear Work Light Mount
Ford F150 Spare Tire Lock Cap Replacement 2014-2018
Ford Mustang Mach-E + StealthHitches Dremel Cutting Guide and Covers
rear bumper cap for Bmw X1
BMW X5 E70 Center Console Blind Plate
BMW
