Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Rear Seat Cup Holder for Jeep Wrangler (1986-1995) YJ
Shared by
3DPrintedCarPartDescription
This is a cup holder for the rear seats in a Jeep YJ. It uses the factory soft-top tracks to slide into, and is secured with one of the screws on the track. I would strongly recommend making the mounting tabs, and the vertical column where the tabs are to a 90% infill, while the rest of the model at 10% - 20% infill. Here is a guide to doing that in Cura.
Compatible Cars
Originally published on thingiverse.com by Brandon Lee (bmlbytes1) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
