Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault 8200420516 (Megane2, Scenic)
Shared by
3DPrintedCarPartDescription
This is a holder for decorative plastic under the hood. if you buy an original spare part, it will cost about 20-25 euros. For such a small piece of plastic. Suitable for renault megane 2 phase 1 and 2 as well as scenic.
Compatible Cars
Originally published on thingiverse.com by Aleksandr Frost (shurec13) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Cap for Renault Scenic 2
License: CC BY-NC
View STL source
Renault Clio 2 exterior trim clip
License: CC BY
View & download STL files
Renault Kangoo 2020 trim clip & plug
License: CC BY
View & download STL files
Clio Sunroof Trim
License: CC BY-NC-ND
View STL source
Mitsubishi ASX Roof Drip Moulding Cover
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
