Renault megane 2 combi trunk cover - image

Files (2)

Megane_part_L_2004-combi.stl

STL

604.3 KB

Megane_part_R_2004-combi.stl

STL

623.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Megane_part_L_2004-combi.stl	Printable file	604.3 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Megane_part_R_2004-combi.stl	Printable file	623.1 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Renault megane 2 combi trunk cover

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

In my renault megane 2004 is a little bit different, so I modified the part for my own need. There is no upper hole on mine, and the bottom hole is deeper. Thanks for the original design.