Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Adattatore_Tappo_Fari_Megane.stl | Primary model | 576.7 KB STL | Slice file | Slice file | Slice file | Ensure a stable printing surface to avoid warping. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Megane 2 MK2 adapter for 100mm dust seal cap for headlight housing
Shared by
3DPrintedCarPartDescription
I replaced the halogen bulbs of the low-beam headlights on my Renault Megane 2 with H7 LED lamps and, due to low space, I had to replace the rigid plastic dust cap with a 100 mm diameter silicone cap. To be able to install it correctly I realized this adapter for the headlight housing. Ho sostituito le lampadine alogene dei fari anabbaglianti della mia Renault Megane 2 con delle lampade H7 a LED e, a causa della maggiore profondità, ho dovuto sostituire il cappuccio parapolvere in plastica rigida con uno in silicone, dal diametro di 100 mm. Per poterlo installare correttamente ho realizzato questo adattatore per l'alloggiamento sul faro.
Compatible Cars
Originally published on thingiverse.com by Michele Mondelli (mikimond) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
