Renault Megane e-tech middle console divider - image

Files (2)

middle_console_devider.stl

STL

4.0 KB

middle_console_divider-v2.stl

STL

336.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
middle_console_devider.stl	Accessory piece	4.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
middle_console_divider-v2.stl	Printable file	336.2 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Renault Megane e-tech middle console divider

0 downloads84 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a roughly created model. Feel free to use and adjust. If you do, please share. Note: The divider will be a bit loose in the front and will be a bit tight in the rear. Remember it is a rough model. update: v2 of the divider is much smoother. I recreated it in Fusion360.