Renault scenic (96-03) door handle trim holder - image

Files (1)

pok.stl

STL

5.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
pok.stl	Primary model	5.6 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Renault scenic (96-03) door handle trim holder

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I've made this reproduction of the original one beacuse a friend of mine was in a hurry with his car (didnt pass OK the technical vehicle inspection). I've tested with him by myself and it works perfectly (and most important, did pass de TVI) so i decided to share it with all the community for help mechanics and 1996 to 2003 megane scenic owners. I've printed it with my custom made prusas in a low resolution profile and normal PLA. (0.3mm, 0.4 nozzle and 30%infill was OK for me) but feel free to try another different profiles. Diseñe esta pieza, reproduciendo la original,porque un amigo tuvo problemas al intentar pasar la itv de su scenic con la pieza rota. La probe con el y funciono perfecta, y ademas paso la ITV, asi que he decidido compartirla con vosotros, sobretodo para ayudar a mecanicos o propietarios de alguna renault scenic mk1 o mk2, la imprimi usando una de mis prusas caseras DIY a baja resolucion con PLA normal y corriente.0.3mm, 0.4 nozzle and 30%infil funciono perfecto pero podeis probar con algunas con mejor calidad.