Renault Zoe Ph2 mounting plates for Brodit mobile phone holders - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Renault Zoe Ph2 mounting plates for Brodit mobile phone holders

0 downloads44 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

These are two mounting plates to which any Brodit brand mobile phone holder can be attached, one horizontal and one vertical. Left hand and right hand drive versions are available. Brodit mobile phone holders for all brands can be found e.g. at https://www.brodit.com/ Use two 3mm felt gliding panels as shown in the picture to create a neat car key holder (protective case). You should consider attaching the mounting plate with double sided duct tape. --- Dies sind zwei Montageplatten, auf die beliebige Brodit-Handy-Halter geschraubt werden können; eine zur horizontalen und eine zur vertikalen Aufstellung. Brodit-Handy-Halter für alle Marken gibt es z.B. auf https://www.brodit-shop.de/home.php Mit 3mm starken, zugeschnittenen Filzgleiterplatten erhält man einen geschickten Schlüsselkartenhalter (siehe Bild). Es ist sinnvoll, die Montageplatte mit doppelseitigem Klebeband zu befestigen.