Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| MK2.1_Knob.STL | Printable file | 1019.0 KB STL | 28g $0.67 | 31g $0.73 | 67g $1.60 | Ensure the print bed is level for accurate printing |
| MK2.2_Knob.STL | Printable file | 1.0 MB STL | 28g $0.68 | 31g $0.73 | 67g $1.61 | Ensure the print bed is level for accurate printing |
| MK2.3_Knob.STL | Printable file | 1019.3 KB STL | 28g $0.67 | 31g $0.73 | 67g $1.60 | Ensure the print bed is level for accurate printing |
| MK3_Knob.STL | Printable file | 1.1 MB STL | 29g $0.69 | 31g $0.75 | 69g $1.65 | Ensure the print bed is level for accurate printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Rotary Rotor Volume Knob For Mazda RX8 Radio (MK3)
Shared by
3DPrintedCarPartDescription
This is my design of Rotary Rotor Volume Knob for the 2004 Mazda RX8. Cura settings: 0.12mm layer (for high details prints) 0.8mm shell all round printed speed: 22mm/s infill: 30% print temperature: 194'C _________________________________________________________________________ MK1 (Available) First Release: 29/07/2017 Update: (Renamed as MK1) 22/02/2018 MK2 (Available) First Release: 22/02/2018 Better shapes and inner gear STL re-attached 21/08/2018 (MK2.3 Updated) MK3 - (Available) First Release: 23/03/2018 Redesign on MK2, more aggressive look and center gears. MK4 & MK5 - (Obsolete) 18/04/2018 **
Compatible Cars
Originally published on thingiverse.com by keith (cc6r2006) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
