Files (7)

Porsche_obere_Haelfte.stl

STL

1.2 MB

Flügelhalter.stl

STL

9.8 KB

Porsche_obere_untere_Haelfte.stl

STL

1.3 MB

Flügel_unten.stl

STL

62.3 KB

Flügel_oben.stl

STL

83.1 KB

Wheel.stl

STL

303.9 KB

Porsche_untere_untere_Haelfte.stl

STL

710.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Porsche_obere_Haelfte.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Flügelhalter.stl	Accessory piece	9.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Porsche_obere_untere_Haelfte.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Flügel_unten.stl	Printable file	62.3 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Flügel_oben.stl	Printable file	83.1 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Wheel.stl	Printable file	303.9 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Porsche_untere_untere_Haelfte.stl	Printable file	710.4 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

RWB Porsche 911 (964) Turbo

0 downloads159 views0 likes

Shared by

Michael Chen

Verified

Description

Replica model of the RWB Porsche 911 (964) Turbo owned by Brian Scotto from Hoonigan.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Porsche (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.