Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| New_Cupholder_modified_part1.stl | Mount / bracket | 510.0 KB STL | Slice file | Slice file | Slice file | Check the overhang area for support needs in your slicer |
| New_Cupholder_modified_part2.stl | Mount / bracket | 50.1 KB STL | Slice file | Slice file | Slice file | Check the overhang area for support needs in your slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Saab 900 Cup holder with support for cans and so on
Shared by
3DPrintedCarPartDescription
I made this in two pieces to avoid support, but I still need support on the overhang, but this is printing with ABS. It may be different when using other materials. The two parts snaps perfectly together and doesn't need any adhesive to stay together. I have tried this with both a 0,5 liter bottle and a 0,5 liter can while driving. Works perfectly.
Compatible Cars
Originally published on thingiverse.com by Otto Rasmussen (ottoen) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
