Samsung S22 Mount for Renault Scenic (2016) air Vent - image

Files (2)

Renault_Scenic_Passenger_Vent_Clip_for_Phone.stl

STL

28.5 KB

Samsung_S22_Mount.stl

STL

235.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Renault_Scenic_Passenger_Vent_Clip_for_Phone.stl	Clip	28.5 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit on the air vent to prevent the mount from coming loose while driving.
Samsung_S22_Mount.stl	Mount / bracket	235.2 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit on the air vent to prevent the mount from coming loose while driving.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Samsung S22 Mount for Renault Scenic (2016) air Vent

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is my initial attempt at creating a 3D design: a sturdy mount for the Samsung Galaxy S22 that can be effortlessly attached to the passenger air vent. It may be possible to mirror the design to accommodate the driver's side.