Samsung S6 mount for a 1999 Mercedes Benz SLK 230 - image

Files (2)

CombinedOpen.stl

STL

27.2 KB

Combined.stl

STL

31.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CombinedOpen.stl	Printable file	27.2 KB STL	Slice file	Slice file	Slice file	Ensure a tight fit by adjusting the mount's length if necessary
Combined.stl	Printable file	31.2 KB STL	Slice file	Slice file	Slice file	Ensure a tight fit by adjusting the mount's length if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Samsung S6 mount for a 1999 Mercedes Benz SLK 230

0 downloads136 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A simple Samsung S6 mount for a 1999 Mercedes Benz SLK 230. It fits into the center of the Mercedes' slide out cup holder. When not in use, the cup holder can be closed with the mount installed. There was no attempt to include a USB cable/charger. The mount's slot is sized for a Samsung S6 in a small/thin case, but should also work with no case (as it also securely holds my Samsung S5 without a case). I would guess it will fit in other Mercedes Benz, but don't have access to others to test it out. It fits in the SLK left to right nice, but there is an overlap in the SLK's cutout that I didn't account for, so it could be longer for a tighter fit. I intend to use sticky tape to hold it in place, so the extra length isn't important to me.