Files (2)

Car_S8_Holder_v2.stl

STL

258.2 KB

Car_S8_Holder_v3.stl

STL

313.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Car_S8_Holder_v2.stl	Mount / bracket	258.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping
Car_S8_Holder_v3.stl	Mount / bracket	313.1 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Samsung S8 Holder for Audi A1

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a simple holder for Samsung S8 phones in a Audi A1 CD drive. It is adapted from the Iphone 5s car holder by Sally Engineering with little improvement on the fixation by adding extra flaps to have more stability (and obvisouly replace the topp part concerning iphone with samsung S8) The holder is designed to let free access to the SD card, and is large enough for S8 with a very thin case. New v3 version: rounded corners.