Files (1)

SEAT_WheelCap_V2.1.4Top.stl

STL

3.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
SEAT_WheelCap_V2.1.4Top.stl	Cover / cap	3.0 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

SEAT IBIZA 2007 Wheel Hub cap

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Well, My wife wanted to have the original grey wheels of her car to have a different color. ( Original grey, to become black) The original wheel hub caps are grey and made out of plastic, rather damaged.. I figured it would be a nice project for me to redesign these caps and share the files. To have a easy print I decided to make the model in two pieces. I later used some sandpaper and glued them together. I also paused at the first layer for the emblem and switched color to have a red `S` on black. The original cap has a spring you can use in this model. If it's missing i can't guarantee the clips alone will be able to hold the printed cap. More photo´s will be added later on. UPDATE: 09:20 07-march-2020 CET) New file upload with the SEAT emblem moved up slightly. (SEAT_WheelCap_V2.1.4Top.stl ) UPDATE 11- May 2020 The clips design will be adapted. It isn't strong enough:-(.