Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Coperchio_faro.STL | Primary model | 1.2 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Seat Ibiza 6J (2008->) Headlight cover
Shared by
3DPrintedCarPartDescription
After purchasing a LED kit for headlights, I found that they won't fit the stock headlight cover. This is designed to fit the low beam headlight cap for the 2 parabolas headlights. This redesigned cap has enough room for the heatsink (mine is without fan) and the control unit, while maintaining the entire headlight sealed. I suggest you to print in ABS or other heat resistant material. I mounted mine 9 months ago and still have no issues at all. If you need the left cap, simply flip the STL.
Compatible Cars
Originally published on thingiverse.com by Brignetti Longoni (Brignetti_Longoni) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
