Files (1)

Shifter_knob.stl

STL

355.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Shifter_knob.stl	Primary model	355.1 KB STL	Slice file	Slice file	Slice file	Verify the 10mm hole size is suitable for your specific shaft before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shift knob round with 10mm hole

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is basic round numberless shifter knob. No support needed thanks to smart desing. Printed with ABS and 20% infill for super fast print speed. Print time is about 2hours. 10mm hole should be tight enough to be screwed on any 10mm-12mm shaft. instagram: @jotenmike email: jotenmike@icloud.com Feel free to edit it.