Shift knob - shifter for my Suzuki - image

Files (1)

Shift_knob_-_Shifter_1.stl

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Shift_knob_-_Shifter_1.stl	Primary model	1.2 MB STL	Slice file	Slice file	Slice file	Scale the model down 1-2% if necessary to fit your shifter threads

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shift knob - shifter for my Suzuki

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Needed a cooler shifter than the stock knob on my Suzuki SX4, so here we go. I printed on a TAZ with MOARstruder, so it was a good bit swollen and clearish, and self-tapped nicely. You may need to scale it down a percent or two for a good fit on your threads.