Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shift Knob with Mazda Batman Logo M10x1.25

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a shift knob I designed for my previous '06 Mazda 6, using the logo provided by nclontz2, here: https://www.thingiverse.com/thing:265193. I believe the shaft size was M10x1.25. The knob is designed to hold the M10 nut captive between the 'main' piece and the 'base', which are secured together with M3 hardware. The emblem press-fits tightly into the cavity on the top of the knob, and should end up even with the surface. The 'bottom seat' piece was added to keep the knob from twisting or abrading the boot when tightening it down.