Single-Din Radio Spacer Bezel - Mazda Print - image

Files (1)

radio_bezel_miata.stl

STL

115.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
radio_bezel_miata.stl	Primary model	115.1 KB STL	Slice file	Slice file	Slice file	Print with a brim or raft for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Single-Din Radio Spacer Bezel - Mazda Print

0 downloads62 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Created to provide a cleaner finish when there was a gap between my single din head unit and the storage cubby for my 1995 Mazda Miata/MX-5. It says in due to the pressure of the faceplate. Have not tested in the extreme heat which is why it is printed in PLA.