
Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| For_Two_Mirror_Mount_short_v7.stl | Mount / bracket | 550.9 KB STL | Slice file | Slice file | Slice file | Ensure a straight pull when inserting or removing the mount to avoid damage |
| For_Two_Mirror_MountV2.2_v10.stl | Mount / bracket | 558.3 KB STL | Slice file | Slice file | Slice file | Ensure a straight pull when inserting or removing the mount to avoid damage |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Smart ForTwo 450 Rear View Mirror Mount for Mini Auto Dim
Shared by
3DPrintedCarPartDescription
This rear view mirror mount enables the retrofit of an auto dimming mirror from a R52 mini to the smart 450. There are two versions, a standard one that mimics the height of the original 450 mirror, and a shorter one for those who prefer keeping the mirror tilted down more. These are designed with a wider base with internal recesses to hide the incoming cables for the mirror. Because of the angle of the original mounts is slightly different you need a straight mount to get the correct mirror angle or you're only looking at your ceiling lining. Check out the Evilution article which mostly talks about the roadster version but using this mount you can do the same thing on your 450. https://www.evilution.co.uk/mod/auto-dimming-rear-view-mirror.htm?highlight=mirror The wiring pin out on the r52 mirror is Black is ground, white is switched live, grey is reversing light so the mirror clears when reversing. Getting to the reversing circuit can be a bit of a pain so you can skip that one if you can't be bothered. Note, when pulling this mount in and out of the mirror you need to straight pull it, twisting or levering risks snapping the mount. If you just want one of these printed and sent to you message me or have a look on my Ebay. Almacd1964.
Compatible Cars
Originally published on thingiverse.com by Alastair MacDiarmid (almacd64) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.

Smart Fortwo 450 Rearview Mirror Short Support
License: CC BY
View & download STL files
Hyundai i30 Mirror DashCam mount
License: CC BY
View & download STL files
1992 mazda miata rearview mirrror dimmer night time driving switch
License: CC BY-NC-SA
View STL source
Lotus Elise/Exige S2 Rear View Mirror Bracket
License: CC BY
View & download STL files
Nissan Leaf: Side camera mount
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
