Smart fortwo - daylight - holder - image

Files (1)

Smart_fortwo_-_daylight_-_holder.stl

STL

1.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Smart_fortwo_-_daylight_-_holder.stl	Mount / bracket	1.6 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Smart fortwo - daylight - holder

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is to mount up some cheap day drive lights to your 451. You have to cutout the covers for the light to shine throug (but not to much! then the holder will fit otherwise you cant fix it to the cover). You'll also need: - 8* M2 screw - 8* M2 nut - 16* M2 washer - strong threadlockable paint.