SQ8 camera mount with GoPro adapter - image

Files (2)

Acople_doble_largo.stl

STL

378.8 KB

Base.stl

STL

44.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Acople_doble_largo.stl	Printable file	378.8 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping
Base.stl	Printable file	44.6 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

SQ8 camera mount with GoPro adapter

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

English. The original idea is to have a comfortable stand to place the SQ8 camera on the dashboard of a car. The design is made so that it is possible to have the power cable connected when the camera is placed in the holder. In order for the camera to hold properly, it is necessary to glue a few pieces of foamy in the camera housing. The foamy must be 2 mm thick for the camera to hold properly. The two pieces can be glued with cyanoacrylate glue so that they are securely fastened together. Español. La idea original es la de disponer de un soporte cómodo para colocar la cámara SQ8 en el salpicadero de un coche. El diseño está realizado para que sea posible tener conectado el cable de alimentación cuando la cámara está colocada en el soporte. Para que la cámara se sujete correctamente, es necesario pegar unos trozos de goma eva en el alojamiento de la cámara. La goma eva debe tener 2 mm de espesor para que la cámara se sujete correctamente. Las dos piezas se pueden pegar con pegamento de cianoacrilato (SuperGlue, Super Ceys o similar) para que queden bien sujetas entre sí.

Compatible Cars

Audi SQ8

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Fernando Bueno (fbuenonet) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.