Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru BRZ/Toyota GT86 Center Console Fire Extinguisher
Shared by
3DPrintedCarPartDescription
The fitment of a 1kg powder fire extinguisher in the BRZ's centre console seemed too good to be true so i made a 3d printed holder for it. Extinguisher - https://www.amazon.co.uk/gp/product/B00N9C2Y0K/ The original idea was to build a top and bottom half with the top half incorporating a QI charger for mobile phones but I have the arm rest installed and there wasn't enough height for an extinguisher and a phone in there while getting it to close properly so I scrapped that idea and made a little holder for the top to keep it secure. I have included the original top half with a cut out for an iPhone 13 Pro incase you have an open centre console. But be aware that I have never printed this part. I'll include the OpenSCAD file so you can tinker, add a QI charger or even a cut out for a cable if you need it. When I just put in the bottom half the extinguisher was sliding back and forth on braking and acceleration. I added a bit of thin sticky backed rubber to it and that held it nice and tight. Rubber matting - https://www.amazon.co.uk/gp/product/B08YJF5MPB/
Compatible Cars
Originally published on thingiverse.com by Ross Gilbert (rossy_gee) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
