Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ASA / ABS 20% | ASA / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Hood_Pole_Latch_v3.stl | Primary model | 76.4 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru hood support rod latch (98 Legacy)
Shared by
3DPrintedCarPartDescription
The clip that holds the hood support rod in the stowed position was broken on the 98 Subaru Legacy Outback. PLA would likely melt in the engine bay, so I printed in ABS. Pictured item was printed with a 0.8mm nozzle.
Compatible Cars
Originally published on thingiverse.com by Timothy Putaansuu (timthefinn) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Subaru Hood Support Rod End Cap
License: CC BY
View & download STL files
2004 Subaru Forester Bonnet Stay Clip (printable)
License: CC BY-SA
View & download STL files
Subaru Impreza hood prop retaining clip
License: CC BY
View & download STL files
2005 Subaru Impreza/Saab 9-2x Hood Prop Clip
License: CC BY
View & download STL files
2001 Subaru Forester hood support bar clip
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
