Subaru Impreza Aftermarket Mic Bracket - image

Files (1)

Subaru_Aftermarket_Mic_Bracket_v1.stl

STL

23.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Subaru_Aftermarket_Mic_Bracket_v1.stl	Mount / bracket	23.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru Impreza Aftermarket Mic Bracket

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a retention bracket designed to hold an aftermarket mic in the factory mic location on the 2013 Subaru Impreza hatchback using the stock mounting screws. During the install process I moved the factory mic out of the way and tucked it into the headliner since the mic appears to be wired inline with the power for the lights and I didn't feel like making any permanent changes. This bracket is a little larger than it should be for this particular mic but I was unable to hear any rattling while driving so it's holding it in place well enough I printed this part in PETG since I live in Texas and it'll be in a location that can reach temperatures that would easily deform PLA.