Subaru Outback 2015 Sunglass Holder Latch - image

Files (1)

Outback_Sunvisor_Latch5.stl

STL

31.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Outback_Sunvisor_Latch5.stl	Primary model	31.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the latch and the surface it will be attached to, possibly using superglue as mentioned.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru Outback 2015 Sunglass Holder Latch

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The latch break off on my wife's 2015 Outback. I 3D printed the part and was able to superglue it down and it works flawless. Enclosed pictures have the 3D printed part in brown, but I just ordered some gray filament and will likely put some on eBay for those who don't have access to a 3D printer.