Subaru Outback (5th gen) smartphone mount remix - image

Files (2)

New_Subaru_Holder_at_angle.stl

STL

511.0 KB

Subaru_Phone_holder_small_at_angle.stl

STL

515.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
New_Subaru_Holder_at_angle.stl	Mount / bracket	511.0 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
Subaru_Phone_holder_small_at_angle.stl	Mount / bracket	515.5 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Subaru Outback (5th gen) smartphone mount remix

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remix of https://www.thingiverse.com/thing:2508783 My wife wanted a few changes: 1) To be able to use it in landscape I cut out the sides and lowered the front part of the cradle 2) to have it turned towards the driver (I rotated it 22.5°). I haven't printed with the turn it yet but the side cut outs work great. The base is a perfect fit into the cup in the console! Snaps right in. It's pretty much a hack job on the remix because I only have access to tinkercad. If anyone wants to clean it up, please do! Two files now. One is from the original 88mm x 17mm and the other is from the 75mm x 14mm.