Subaru Phone center console mount, magnetic - image

Files (1)

Magnetic_mount_.5x.19_mag.STL

STL

683.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Magnetic_mount_.5x.19_mag.STL	Mount / bracket	683.1 KB STL	Slice file	Slice file	Slice file	Use a strong magnet for the best holding power (10+ pounds recommended)

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Subaru Phone center console mount, magnetic

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Subaru Phone center console mount, magnetic 2018 subaru outback but may fit others with same feature. Can't find a good place for your phone? Add this to the center console and it's a nice neat place. Magnets added are 1/2" x 3/16" get something with good poundage of holding power. 10+ is good. Magnet pockets are designed to be a press fit but a little glue doesn't hurt. Something like this works, https://www.amazon.com/aElement-Round-Disc-Magnets-2x3/dp/B08SSCTYQN/ref=sr_1_7?dchild=1&keywords=magnet+.5&qid=1623197483&sr=8-7 If you have a magnet already and would like a different size PM me the dimensions.