WRX_seatbelt_lock.STL

STL

328.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

20g

Based on 25% main infill across listed model files

Material cost

$0.47

Filament only at roughly $24/kg PETG / ASA

Print time

34m–56m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
WRX_seatbelt_lock.STL	Primary model	328.4 KB STL	18g $0.43	20g $0.47	43g $1.04	Ensure a strong adhesion to the build plate to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Subaru seat belt lock device

0 downloads46 views0 likes

Shared by

Verified

Description

Summary Modelled to fit the seatbelt latch in a 2019 Subaru WRX. Certainly works with others, but I can't provide an exhaustive list.

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (nickboers) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.