Files (1)

Tweeter.stl

STL

115.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
Tweeter.stl	Primary model	115.3 KB STL	Slice file	Slice file	Slice file	Ensure the print orientation is optimized for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru SVX Tweeter Adapters

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Part to adapt a 1" (0.9" or 24mm actually) aftermarket tweeter to the stock SVX tweeter mount. The tweeter I used was a Hertz Uno T24, comes as a set with a 6.5" woofer in the K165 speaker kit: http://www.hertzaudiovideo.com/car-audio-systems-uno-k165/ Note: Print in high-temp ABS or other suitable material. PLA will melt in your dash!

Compatible Cars

Subaru (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Ed Eberts (edeberts) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.