Files (2)

plain_washer_cap.STL

STL

9.3 MB

wrx_washer_cap.STL

STL

920.6 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
plain_washer_cap.STL	Cover / cap	9.3 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
wrx_washer_cap.STL	Cover / cap	920.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Subaru WRX Washer Cap

0 downloads192 views0 likes

Shared by

Michael Chen

Verified

Description

Windshield washer cap for 2002 Subaru WRX This will likely fit other Subaru applications but i am not sure Build with the letters facing up Build the part with the letters facing up. Cut a piece of standard 6 mm craft foam to fit in the lid. This will act as a seal and a spring to hold the cap tight to the washer tank. The foam part can cut by hand ( a 2.7" dia circle) or cut on a laser cutter using the included DXF.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Subaru (all models)

Published Mar 7, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files