Adapt.lpg.stl

STL

7.0 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Adapt.lpg.stl	Primary model	7.0 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure adequate ventilation when printing with PETG or ASA

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Suction adapter for Chevrolet Tahoe LPG system

0 downloads190 views0 likes

Shared by

Verified

Description

1) Material resistant to high temperatures required. 2) make holes of adequate size on the internal funnel to release the LPG into the carburetor.

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.