Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Sun Visor Cover for Mini Cooper

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

My father-in-law's Mini Cooper didn't come with covers for the sun visors as they had broken off. Apparently they don't sell these covers, and want you to buy the entire mirror assembly which is bonkers. Full disclosure, the design of the mirror itself is kind of dumb as there are two plastic nubs holding in the cover, but based on the cover itself and where the holes need to be placed, there's still a decent amount of stress on the shell, so even these "redesigned" covers (I didn't have an original to go from so I just kind of winged it) will likely eventually fail. If you wanted a more permanent fix, you could likely grind down the "nubs", drill through, and remix the part to include the nubs on the cover itself rather than the "female" part of the visor. In any case, save yourself the money on a new set of mirrors and just print this, it seems to work great.