Sunvent roof adapter for volkswagen crafter 2006-2017 - image

Files (2)

sunvent_interior.stl

STL

68.6 KB

sunvent_roof_adapter_crafter.stl

STL

85.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

15g

Based on 35% main infill for the largest likely-needed model file

Material cost

$0.35

Filament only at roughly $24/kg PETG / ASA

Print time

25m–42m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
sunvent_interior.stl	Printable file	68.6 KB STL	11g $0.26	14g $0.33	26g $0.63	Use outdoor-resistant material due to sun exposure
sunvent_roof_adapter_crafter.stl	Printable file	85.1 KB STL	12g $0.28	15g $0.35	28g $0.67	Use outdoor-resistant material due to sun exposure

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Sunvent roof adapter for volkswagen crafter 2006-2017

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Print the adapter with an outdoor resistant material (abs, petg...). Catalog note: Sunvent roof adapter for volkswagen crafter 2006-2017 is a 3D-printable car-part listing indexed for classified fitment 2006-2017 Volkswagen Crafter. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.