Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 30% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tesla_rearcenterconsoletray_logo.stl | Primary model | 207.1 KB STL | Slice file | Slice file | Slice file | Verify final orientation and support decisions in your slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Supportless 2021 2022 Tesla Model 3 Y Rear Center Console Arm Rest Tray By Printer2261
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability in varying car conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
supports unlikely
Infill
20-40% infill for a balance of strength and weight
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y and 3 2021+ dont come with a tray anymore and those center console storage solutions are deep. Printer2261 wrote this about his model I made a supportless model of the center console tray. Fits 2021+ Tesla Model 3 and Model Y. There are two files: one has the Tesla logo and one is blank. I have added a gcode sliced in Prusaslicer 2.5 Alpha 2 to give a rough filament usages estimate and time estimate. I printed it using PLA, which should be good enough for most people, as it rarely gets over 60 degrees in the center console. I added ironing for the logo and the handles. I also used 3 perimeters but the sliced gcode has 2. You should be able to do less, but I normally prints with 3 perimeters and no vertical wall thickness. It is faster and prettier in most prints. The gcore I recommend you slice your own gcode.
Originally published on printables.com by TrickyCode · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 Center Console Tray -- 2021
Central Console Tray for Tesla Model 3 MY21
Tesla Model 3 / Model Y Console Key Card Holder
Tesla Model 3 Center Console Tray
Tesla Model 3 Center Console Plastic Bag Hook
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
