Suspension strut top mount cover for Nissan Leaf - image

Files (1)

Suspension_Strut_Top_Mount_Cover_For_Nissan_Leaf.stl

STL

294.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Suspension_Strut_Top_Mount_Cover_For_Nissan_Leaf.stl	Cover / cap	294.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Suspension strut top mount cover for Nissan Leaf

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The suspension strut of the nissan leaf is not properly protected and water will pool up causing corrosion and expensive repairs. This simple cap will snap right on if you push it firmly down over the strut top, protecting it from water and other goo that might end up there. Some leafs have a small cover that does not provide sufficient protection, but my leaf had no cover at all. Designed for the 2018-2022 generation of leafs, but might fit the older generation.