Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Suzuki retro badge ( Jimny )

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A remake of the retro suzuki badge that I can't afford the shipping. Thicker than the original badge for improved legibility. The badge has a size of 200mm x 35mm and a mirrored stl is included - incase your printer prints it out the wrong orientation. The smaller version is around 170mm x 20mm- suitable for chilling around your desk or smaller objects ( shown in thumbnail ) sanding and applying wall putty maybe required depending on your resolution of the printer before spraying cheers!