Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Part-1_glue_edit.stl | Primary model | 49.7 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesive is used for the glue connection to the car's console |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Suzuki Vitara 1999 switch blind (XVavron's model remix) - glue connection
Shared by
3DPrintedCarPartDescription
This remix gets rid of latches, and switch has to be glued to car's consol after printing. It may be an option if your filament is not flexible enough to support original model. Original print: http://www.thingiverse.com/thing:2818969 Suzuki Vitara 1999 switch blind by XVavron is licensed under the Creative Commons - Attribution license. http://creativecommons.org/licenses/by/3.0/
Compatible Cars
Originally published on thingiverse.com by Paweł Michnowicz (stekman10) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
