Switch holder for Ford C-max 2008 - image

Files (6)

Arm_3.0.stl

STL

1.6 MB

Base_2.01.stl

STL

3.5 MB

Base_2.0_without_lateral_fins.stl

STL

2.9 MB

Case_3.0.stl

STL

1.7 MB

Interlocking_base-arm.stl

STL

2.2 KB

Interlocking_base-arm_small.stl

STL

1.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Arm_3.0.stl	Printable file	1.6 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Base_2.01.stl	Printable file	3.5 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Base_2.0_without_lateral_fins.stl	Printable file	2.9 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Case_3.0.stl	Printable file	1.7 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Interlocking_base-arm.stl	Accessory piece	2.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Interlocking_base-arm_small.stl	Accessory piece	1.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Switch holder for Ford C-max 2008

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an Switch holder for Ford C-max of year 2008. I added hot glue to avoid hitting the armrest, and i joined the pieces with hot glue except the console holder to insert the charging cable! WARNING: CHECK THE QUANTITIES CAREFULLY FOR DON'T THROW AWAY MATERIAL AND PRINTING HOURS!!!!