Files (3)

cd_nexuswedge_v1_p3-fix-center.stl

STL

37.0 KB

cd_nexuswedge_v1_p2-fix-center.stl

STL

17.0 KB

cd_nexuswedge_v1_p1-fix-center.stl

STL

37.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cd_nexuswedge_v1_p3-fix-center.stl	Printable file	37.0 KB STL	Slice file	Slice file	Slice file	Ensure the back face is flush for a flat surface
cd_nexuswedge_v1_p2-fix-center.stl	Accessory piece	17.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
cd_nexuswedge_v1_p1-fix-center.stl	Printable file	37.0 KB STL	Slice file	Slice file	Slice file	Ensure the back face is flush for a flat surface

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Tablet CD Mount (Nexus 7)

0 downloads147 views0 likes

Shared by

Michael Chen

Verified

Description

Who the heck uses CDs anymore? Use the slot to mount a Nexus 7 & immediately upgrade your ride with GPS, internet music & all the other luxuries of this digital age. The weight of the Nexus 7 helps hold the dock tight, even on bumpy roads. Keep in mind though, I designed this for a '09 Mini Clubman so the SketchUp file is attached to widen/thin the hinges as needed (and alignment notches shouldn't change size unless you reflect that in the other parts as well.) The model is designed to be printed on any 5"x5"+ printer. Feel free to make a derivative to fit your own tablet by adjusting the width/height of part 2. Sorry for the messy geometry. Print all three parts and attach. Make sure the back face is flush so your Nexus 7 rests on a flat surface. You'll likely need to sand down the alignment notches a bit depending on the reliability of your machines.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files