← Back to Browse Parts
Files (2)
Tablet_houder_links.STL
STL
62.3 KBTablet_houder_rechts.STL
STL
66.5 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
2 model files
Typical selected file
12g
Based on 25% main infill for the largest likely-needed model file
Material cost
$0.28
Filament only at roughly $24/kg PETG / ASA
Print time
20m–34m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tablet_houder_links.STL | Printable file | 62.3 KB STL | 11g $0.26 | 12g $0.28 | 26g $0.61 | Ensure proper adhesion to the print bed to avoid warping |
| Tablet_houder_rechts.STL | Printable file | 66.5 KB STL | 11g $0.26 | 12g $0.28 | 26g $0.62 | Ensure proper adhesion to the print bed to avoid warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Phone Mounts
Tablet holder for Citroën C1 / Peugeot 107
0 downloads40 views0 likes
Shared by
3DPrintedCarPartVerified
Description
Tablet holder for Citroën C1 / Peugeot 107. The design exists out of 2 printable parts. The holder is mounted to the car with velcro.
Compatible Cars
Published Jun 27, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Lars Broersen (LarsBroersen) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
