Files (1)

Tach_Mount_v3.2.obj

OBJ

1.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tach_Mount_v3.2.obj	Mount / bracket	1.6 MB OBJ	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tach mount for Mini Cooper r56

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a tach mount that I made for my 2010 Mini Cooper S, I needed two type of standard mounts, one is the slot in the left and the other one the 17mm ball mount on the right. I use this mount with both a CarPlay display unit and a phone mount for Android since Android Auto is unusable for me. But since the ball mount is standard you can attach pretty much anything that uses it. The left side is for an OBD2 display that shows me some car data.