Tacoma 1st Gen Dual USB Switch Mount Adapter - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tacoma 1st Gen Dual USB Switch Mount Adapter

0 downloads48 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Designed this switch blank adaptor to hold a dual USB extension cable for an aftermarket radio installation in a 1st Gen Tacoma. This adaptor avoids having to modify the original OEM switch blank part. The adapter has small clips that clip into the switch opening. The USB extension has small clips that clip into the adaptor. The USB clips are not as strong as the clips that hold the adaptor into the opening, so a few dabs of hot glue was placed on to the back side of the adaptor on the USB's clips. No hot glue needs to be put on any original Toyota parts. USB Extension: https://www.amazon.com/BATIGE-Square-Extension-Motorcycle-Dashboard/dp/B078LXX3MD Printing: Printed at 100% infill for strength. Uses 1.13m of filament (3.45g). Support is needed. (Used the default PrusaSlicer-generated support.) Printed on a Prusa i3 MK3S+ printer. The adaptor should push into the switch opening with a clean fit. The Fusion 360 file is included to allow for easy Remixing of the design.