Tacoma Bed Fishing Rod Holder Plates - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 60%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tacoma Bed Fishing Rod Holder Plates

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

These plates are for a fishing rod holder project I did. I origionally cut the plates out of plywood but that obviously didnt hold up to the elements so I tossed these together pretty quickly. I printed these solid 90% infill at 0.2 step rate on slow setting with a DaVinci AIO 1.0 The nut cutout fits a 1/4-20 thread stainless steel nut perfectly snug with a little sanding/dremel.