Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tazer_Magnetic_Mount_JL_JT.stl | Mount / bracket | 111.8 KB STL | 13g $0.30 | 14g $0.33 | 30g $0.72 | Ensure the model is oriented to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tazer Magnetic bracket for Jeep Wrangler JT or JL
Shared by
3DPrintedCarPartDescription
I created a easy to install/easy to remove magnetic bracket to hold your Tazer JL Mini in a Wrangler JL or JT. This bracket requires no tools, can be used one handed for quick removal and provides visibility to see the LED status light and access the USB port through the access panel on the front. Securely sticks to the driver side bar at the bottom of the dash, doesn't get in the way while driving. After removing the clip and ziptie loops from the original and slightly enlarging the opening to create a snug, yet easily removable fit, I added the magnetic connection. This print will require 5 - 12mm x 3mm earth magnets (two per outside, one in the center for the bolt) and are friction fit, no glue required.
Compatible Cars
Originally published on thingiverse.com by James Cayer (CaptainJC) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
