Tesla Center Console Cup Holders - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Tesla Center Console Cup Holders

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

These are better cupholders for the new (2018/2019) integrated center console on a Tesla Model S. They are printed in three parts: 1) The top cupholders 2) the bottom guides and 3) the "door" that flips up to stop the console door, allowing for a cleaner look. After printing the top needs two small 4mm holes drilled where the markers are for the bottom pegs. Also a small 2MM hole needs drilling on the door hinge and a small wire used for the hinge peg. Designed in Sketchup. Printed on an old Makerbot Rep2.