Files (1)

Tesla_Change_Holder.stl

STL

351.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Change_Holder.stl	Mount / bracket	351.0 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Tesla Change Holder

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I used to always store my spare change in one of the cup holders but that made it difficult to get the change out when I needed it. I designed this Tesla change holder to fit inside one of the cup holders and keep the change organized. You'll need to pull the change holder out to get the change, but it's still much simpler than before. Risers at the bottom make it easier to get the change out.